Pipe Cutting and beveling Machine:
The series machine is ideal for all types of pipe cutting, beveling, and end preparation. The split frame design allows the machine to split in half at the frame and mount around the OD of the in-line pipe or fittings for strong, stable clamping. The equipment performs precision in-line cut or simultaneous cut/bevel, single point, counterbore and flange facing operations, as well as weld end preparation on open ended pipe, ranging from 3/4” to 56” O.D.(DN20-1400mm), on most wall thicknesses and material.
| Features(Pneumatic pipe cutting beveling machine) |
- Split Frame
- Aluminium Frame, light weight
- Cold Cutting/Beveling improve safety
- Cut or Cut/Bevel simultaneous
- Low Axial & Radial Clearance
- Tool feed automatically
- Easy install & Operation
- Pneumatic, Electric and Hydraulic type for option
- Machining OD of pipe from 3/4” up to 56”
New improvement(Pneumatic pipe cutting beveling machine)
1. Middle locking of rotation ring.
Previous the locking screw at the side, the improved new ones, it is in the middle, this make the locking more symmetry and stable. And the space for loosing screw is bigger than before, when split the ring, more convenient.
2. Uncovered locking screw of stationary ring
It's difficult to assemble the split frame on the pipeline when 2 locking screws at the side. The new uncovered design makes the installation easy and user friendly, especially when install the split frame on pipeline.
| Specification(Pneumatic pipe cutting beveling machine) |
- Driven options: Pneumatic, Hydraulic or Electric
- Air requirement: 1500L-3000L/Min@0.6/0.7Mpa
- Hydraulic requirement: 2-60L/Min@12.5Mpa
- Electric requirement: 220-240V 1PH 50/60HZ
- Feed mode: Star wheel, automatically
- Feed rate: Fixed@0.08mm per circle
- Packaging: Plywood case
| Selection Guide(Pneumatic pipe cutting beveling machine) |
| Model | Working Range (OD) | d (mm) | D(mm) | L (mm) |
| Inch | mm | Steel body | Aluminum body |
| 168 | 2”-6” | 50-168 | 185 | 512 | 178 | 192 |
| 230 | 2”-8” | 50-230 | 236 | 564 | 178 | 192 |
| 275 | 5”-10” | 125-275 | 283 | 612 | 178 | 192 |
| 325 | 6”-12” | 168-325 | 334 | 665 | 178 | 192 |
| 377 | 8”-14” | 219-377 | 386 | 719 | 178 | 192 |
| 426 | 10”-16” | 273-426 | 438 | 776 | 180 | 195 |
| 457 | 12”-18” | 300-457 | 469 | 807 | 180 | 195 |
| 508 | 14”-20” | 355-508 | 518 | 862 | 190 | 195 |
| 560 | 16”-22” | 400-560 | 570 | 910 | 190 | 195 |
| 610 | 18”-24” | 457-610 | 618 | 960 | 190 | 195 |
| 660 | 20”-26” | 508-660 | 670 | 1020 | 190 | 195 |
| 715 | 22”-28” | 550-715 | 719 | 1084 | 190 | 198 |
| 762 | 24”-30” | 600-762 | 770 | 1134 | 190 | 198 |
| 830 | 26”-32” | 660-813 | 830 | 1194 | 192 | 207 |
| 914 | 30”-36” | 762-914 | 924 | 1296 | 212 | 214 |
| 1066 | 36”-42” | 914-1066 | 1077 | 1468 | 212 | 216 |
| 1230 | 42”-48” | 1066-1230 | 1248 | 1646 | 212 | 216 |
Suggest: size 1066 and above size select and use hydraulic type
| Typical Buttwelding Joint(Pneumatic pipe cutting beveling machine) |
Suggest: if any other welding seam or special demand, please better to advise us before you place the order.
Before you place order to us, please let us know the following information:
-
Choose the right size
-
Advise us the driven options: Pneumatic, Electric or Hydraulic
-
Advise us the body options: Steel body or Aluminum body
-
Confirm electric power supply ( Voltage, frequency and phase)
-
Confirm the beveling angel required
-
Confirm the welding joint required (U, V, Double V or Compound preparation)
-
Advise your pipe material ( Carbon steel, stainless steel or others)
-
Other special demands about machine
-
The spare parts needed
-
If the pipe wall thickness more than 30mm, inform us in advance (Important)
After-sale Service
- Warranty period: 12 months(Electric motor 6 months)
- Emergency spare parts required dispatched within 24 hours
